The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes
SERIOUS AND PRECISE POWER- Enhanced by automatic calibration, the KICKR stands up the demands of the world's most powerful cyclists by delivering 2,200 watts of resistance that's accurate to within +/- 1%. REALISTIC RIDE FEEL- KICKR’s professional-grade high-inertia 16lb flywheel and AXIS feet combine to provide an ultra realistic ride feel. SMART RESIST- Set your resistance or power threshold through your favorite app for the most efficient workout possible. THE MOST POWERFUL AND REALISTIC INDOOR TRAINER EXPERIENCE. Power and accuracy designed to offer the world’s most demanding cyclists the ultimate indoor riding experience. KICKR AXIS Feet PROFESSIONAL-GRADE CONSTRUCTION - KICKR’s robust steel construction and a wide stance provide the durability and stability needed to endure years of high-intensity training.
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts
For a stable, worry-free ride with any rear wheel-mounted trainer. Product Features - For a stable, worry-free ride with any rear wheel-mounted trainer. - Unique 3-level design lets you select the level of difficulty. - Stack two blocks to simulate climbing workouts. Three different positions to raise your front wheel and simulate hill climbs - 2.1 inches (5.3 cm) - 2.7 inches (6.8 cm) - 3.1 inches (7.9 cm)
Better health. Faster splits. More me-time. Whatever your goals may be, the Fluid2 helps you get the most out of each indoor training ride. The large, precision-balanced flywheel (with patented fan design) lets you easily customize each ride simply by shifting gears, just as you would outside. This design also helps keep your Fluid2 working better – longer. And, thanks to our built-to-last manufacturing process, the Fluid2 can help you conquer one goal after the next. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling trainer in the USA - Compatible with Zwift and other indoor cycling apps
Reliable. Durable. Quieter Than Ever Before. When it comes to indoor bike trainers, the most frequently asked question is: how quiet is it? Taking this to heart, our Madison, Wisconsin-based team put this query under the microscope and set a goal to build a trainer so quiet, that the only sound is that of your drive train. The result? A direct drive smart trainer that touts a sound specification of 59 decibels at 20 mph. In other words, the H3 is five times quieter than previous generations, making it the quietest smart trainer to ever leave our doors. Following the Saris direct drive smart trainer legacy, the H3 features the same reliably and durability as its predecessors. Each H3 is made from cast and machined aluminum sourced from America’s heartland. Encased inside are components meticulously calibrated to measure power, speed and cadence, as well as a precision-balanced flywheel - all built to handle 2000 watts and replicate a 20% climbing grade. Tested to withstand heavy training, the H3’s internal cooling system will keep the electromagnetic resistance system working – and accurate – long after your legs have given out. - Quieter Than Ever: all new drive system shaves decibels off previous generations. - Precise Training: +/- 2% power accuracy. - Controlled and Consistent: electromagnetic resistance provides a measured workout every time. - Direct Drive Design: widest bike compatibility and eliminates wheel slips. - No External Sensors Required: measures speed, cadence and power. - Seamless Integration: connects to indoor cycling apps with dual ANT+ FE-C and Bluetooth FTMS standards. - Zwift certified. Specs - Noise level: 59 decibels at 20 mph - Power measurement accuracy: +/- 2% - Maximum power output: 2000 watts at 20 mph - Simulates a 20% climbing grade - Fast response electromagnetic resistance - Measures speed, cadence and power – no external sensors needed - 20 lb precision balanced flywheel - Integrated dual ANT+ FE-C and Bluetooth FTMS standards - Built-in front wheel block - Integrated carrying handle - Compatible with Shimano 8-11 speed cassettes - XD/XDR freehubs sold separately (link) - Thru-axle compatible for bike frames with fork widths of 142 or 148. - Quick-release compatible for bike frames with fork widths of 130mm and 135 mm. - Compatible with a wide variety of devices and indoor cycling applications, including Rouvy, Zwift, TrainerRoad and many more. Contact us with questions about compatibility with other software. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2 (link). - LED indicator lights communicate connectivity and more. - Direct drive design directly connects the bicycle to the resistance unit, eliminating tire wear. - Internal cooling technology ensures accurate ride data even during the hardest of workouts. - Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability and easy storage. - Accessible and balanced handle allows for smooth, anyone-can-carry transit of the trainer. - Over the air (OTA) firmware updates and calibration via the Saris app (link to firmware page) - Maximum weight (rider and bike): 300 lbs. - Dimensions when Open L*H*W: 31x18.5x19.5 inches (787.4x469.9x495.3 mm). - Dimensions when Closed L*H*W: 8.5x18.5x19.5 inches (76.2x469.9x495.3 mm). - Weight: 47 lb. (21.3 kg). - Cassette sold separately.
A League of Its Own Since their inception, bike trainers have set out to solve one problem: simulating outdoor riding, indoors. Then came smart trainers and indoor cycling apps, complete with virtual races, group rides and controlled workouts. Suddenly athletes across disciplines were eager to ride indoors. The indoor training renaissance isn’t over. To make the experience even better, and to harness all the benefits riding indoors has to offer, you need a way to stay comfortable and engaged. The MP1 Nfinity Side-to-side movement isn’t new, but it also doesn’t capture the natural movement you experience outdoors. The MP1 with Nfinity technology truly moves the way you do because it adds the fore/aft axis to the equation. The MP1 combines over 20 years of indoor training expertise to not only create the movement platform category – but to perfect it. The result is an unparalleled trainer platform that reimagines the indoor trainer experience altogether. Features Introducing Nfinity Technology In order to bring stationary cycling to life, the MP1 needed movement in multiple axes. The result is an innovative technology combining curves, axes, gravity physics and mechanical ingenuity. The MP1 is the only way to experience this revolutionary technology. Compatible with Nearly Any Bike Trainer If you can experience the freedom of movement indoors, then why limit access with trainer compatibility? We believe that anyone with a bike trainer that fits should be able to tap into the benefits of Saris Nfinity Technology via a ride on the MP1 – which is pretty much everyone. So grab your trainer and check our bike trainer fit guide. Increased Comfort Riding a bike indoors can be uncomfortable because your movement is typically limited by the trainer. Pressure mapping and motion capture technology shows the MP1 significantly alleviates saddle and foot pressure compared to riding a static trainer. Recruit More Muscles It’s true that adding your trainer of choice to the MP1 engages more muscles than a stationary ride. From engaging the upper body to get through sticky spots to activating smaller, key muscles to stay balanced, the MP1 is the only way to recruit large and small muscle groups while riding inside. Adjustable Touch Points The MP1 is compatible with a wide range of setups. Complete with adjustable touch points and well-placed grip tape, the MP1 platform can be used with nearly every indoor bike trainer and training footprint. Looks Good, Too The MP1 looks as good as it moves. The platform deck is made from beautiful birch, while steel sourced from America’s heartland ensures the MP1 can handle the hardest of efforts. For the most cohesive aesthetic, the MP1 is the cornerstone of the Saris trainer eco-system, complete with the trainer desk and smart trainer of choice. It’s Fun, Pure and Simple Our goal was to make the time spent indoors as enjoyable as possible. The movement platform not only enhances the virtual training experience, the MP1 with Nfinity Technology brings indoor training to life. - Nfinity Technology: revolutionary tech that brings movement indoors. - Movement for All: compatible with a variety of training configurations; bikes, desks and nearly every trainer available. - Trailblazing: the MP1 ushers in a type of riding never seen or felt before. - Pure Fun: a responsive, immersive and authentic training experience that’s anything but boring. - Get Comfortable: reduces pressure on touch points so you can put in the miles. - Eye-Catching: mix of steel, aluminum and birch compliment most training spaces. - Personalized Eco-System: put the MP1 at the center with your trainer of choice to create your ideal training station. Specs - Max Fore-Aft Travel: 9.5” - Max Side-to-Side Angle: 6° - Compatible with all major brands and models of bike trainers. - Materials: Steel, aluminum and birch - Weight: 62 lb - Dimensions: 6” tall x 63” long x 35.5” wide - Fully assembled in box - Grip tape strategically placed to assist in walking on the trainer platform. - Tested to the combined weight (rider, bike and trainer) of 350 lb. - Built-in front wheel block for road and MTB.
No fancy gizmos. No wires. No fuss. If you’re looking for an easy way to ride your bicycle indoors, call off the search – you’ve found it. Whether your training for a local charity ride or working to beat your friend’s FitBit score, the Mag indoor bike trainer can help you make it happen. Simply connect the trainer to the rear wheel of your bike, hop on, and pedal away. Plus, the Mag comes with five adjustable levels of resistance so you can adapt every ride to your liking. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Features five adjustable levels of resistance - Compatible with Zwift and other indoor training apps
Keeps corrosive sweat from reaching your frame. - Cell phone pouch included.
- Protects your floor from sweat and bike grime. - Keeps your trainer from "walking" during intense workouts. - Durable construction absorbs vibration and noise.
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
No matter your training category, the H2 is the perfect addition to any athlete’s toolbox. From weekend warriors to pro-podium chasers, mountain bikers to triathletes, this smart direct drive trainer is versatile enough to push any training regimen to the edge. The heart of the H2 is its ability to replicate real world inertia better than anyone else thanks to it its massive, 20-pound precision-balanced flywheel. The H2’s soul is its impressive electrical prowess, complete with integrated cadence, speed and power data, internal cooling, over-the-air firmware updates, dual-band ANT+ and Bluetooth compatibility and topped off with its electromagnetic resistance system for rapid resistance changes within virtual training environments. Plus, at 64 decibels the H2 is library-level quiet - even if your next virtual victory may not be. - Noise level at 20 mph is 64 decibels, quiet enough to ride in a library. - PowerTuned using PowerTap technology for up to +/- 2% accurate power readings. - Thru-axle compatible for bike frames with fork widths of 142 or 148. - Quick-release compatible for bike frames with fork widths of 130mm and 135 mm. - Integrated dual ANT+ FE-C and Bluetooth standards. - Compatible with a wide variety of devices and virtual training application, including Rouvy, Zwift, TrainerRoad and many more. - - - - - Contact us with questions about compatibility with other software. - 20 lb precision balanced flywheel provides quiet, vibration free and true-to-the-road riding experience. - Fast response electromagnetic resistance ensures most responsive resistance and maximum power available. - Robust design is capable of handling up to 2000 watts at 20 mph and can simulate up to a 20% climbing grade. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2. - Internally integrated speed, cadence and power data eliminates the need for extra external sensors. - LED indicator lights communicate connectivity and more. - Direct drive design directly connects the bicycle to the resistance unit, eliminating tire wear. - Integrated front wheel tray adds stability to ride without taking up any extra storage space. - Internal cooling technology ensures accurate ride data even during the hardest of workouts. - Built-in front wheel tray adds stability to ride and nests within the trainer when not in use. - Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability and easy storage. - Includes a Shimano splined freehub for compatibility with Shimano 8-11 speed cassettes. XD freehubs are also available and sold separately. - Accessible and balanced handle allows for smooth, anyone-can-carry transit of the trainer. - Over the air (OTA) firmware updates via Bluetooth ensures the H2 is up to date with all the latest features. - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - Dimensions when Open L*H*W: 31” x 18.5” x 19.5” (787.4 x 469.9 x 495.3 mm). - Dimensions when Closed L*H*W: 8.5” x 18.5” x 19.5” (76.2 x 469.9 x 495.3 mm). - Weighs in at 47 lb. (21.3 kg). - ANT+ and BlueGiga USB dongles sold separately. - Cassette not included. - Zwift certified.
Keep corrosive sweat from reaching your frame while you're generating heat on your trainer. - Cell phone pouch included
Replacement straps for Sunlite FlatForm II pedals - Strap size: 340 x 55mm
- Heavy-duty nylon toe straps with classic style steel buckles - Narrow design fits most cage style pedals - 460mm length
Look, your child is destined for greatness. We won't dispute that. But, why wait until they can walk for them to rock their awesomeness? If they're crawling, they're ready to explore the world. Attach the Strider Rocking Base to a Strider 12 Bike and get them rocking. The rocking base doesn't just familiarize them with a bike, the rocking motion helps develop their balance, spatial awareness, and core strength. No batteries. No annoying sounds. Just pure, rocking fun. - Compatible with the Strider 12 Classic, Sport, and Pro Balance Bikes - When the Strider 12" Bike is attached this product is intended for ages 6 months – 5 years old for Strider Sport and Pro, and ages 6 months – 3 years for Strider Classic.
Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
The Saris thru axle adapter is designed for indoor use on Saris- and CycleOps-branded trainers only and should not be ridden outdoors. Compatible with current classic series trainers. Not compatible with the JetFluid Pro, SuperMagneto Pro, PowerBeam Pro, or PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm or 148x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. - Adapts a thru axle hub bike for a trainer - Only compatible with current basic trainers - Fits most 142-148mm thru axle bikes with 1.0 or 1.75 thread pitch
The Saris 20/24-inch Wheel Adapter allows you to use your BMX or recumbent bike with your trainer.
Connect your PC to CycleOps VirtualTraining.
Take on any race, club ride, or weekend adventure with confidence. When you add Saris rollers into your training routine, you'll increase your balance, control, and ability to ride a straight line — all of which translate to more efficiency, power, and technique on the road. And, because you have to pedal 100% of the time to balance your bike, you get an amazing workout, no matter your pace. - Improve balance, control, and ability to ride a straight line. - Aluminum roller drums run silently and smoothly. - Precision-lathed 3.25" aluminum roller drums won't distort in heat or sunlight. - Fold flat or stand on end for convenient storage. - Designed for both indoor and outdoor use - 16" wide wheel base fits just about any size of bike and allows plenty of room to move around. - Rubber foot pads ensure that the only thing moving on the rollers are the drums, providing a secure, sturdy ride. - Durable steel-frame construction - Adjustable belt for right and left dismount - Resistance Roller uses zero moving parts to deliver quiet magnetic resistance. - Maximum wheelbase 44.5" (axle to axle) - Minimum wheelbase 37.5" (axle to axle)
BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.
Whether you want to attend a group ride in Zwift, climb the Dolomites in Rouvy, or simply need a sweat session, the M2 smart trainer can get you there. All you need is your bike, the M2, your favorite virtual training software, and device of choice. This do-it-all, smart bike trainer is capable of replicating any workout thrown its way, up to 1500 watts and a 15% climbing grade. Simply connect to your virtual training application of choice via integrated dual-band ANT+ FE-C and Bluetooth, and let the M2’s electromagnetic response system do the rest. And, thanks to integrated speed, cadence, and power data, you can track and record performance data without extra external sensors. Plus, our innovative clutch knob ensures perfect tire-to roller connection for every single ride. - Noise level is a quiet 69 decibels at 20 mph. - PowerTuned using PowerTap technology for accurate power readings up to +/- 5%. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm, and 135mm. - Optional thru-axle adapter available for 142x12mm and 148x12mm. - Integrated dual ANT+ FE-C and Bluetooth standards. - Fast response electromagnetic resistance ensures most responsive resistance and maximum power available. - Robust design is capable of handling up to 1500 watts at 20 mph and can simulate up to a 15% climbing grade. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2. - Internally integrated speed, cadence, and power data eliminates the need for extra external sensors. - LED indicator lights communicate connectivity and more. - Internal cooling system moves air through the trainer to keep it cool while active thermal sensors ensure accurate performance data even during the hardest of workouts. - Comes on the Saris foldable Classic frame with spring loaded, bolt-action lever. - Features clutch knob for perfect roller to tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27", and 29" - up to a 2.0-inch tire. - Does not fit 650c wheel sizes, nor all 29er tires. - Precision-machined alloy roller reduces tire wear and slippage. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Trainer tire recommended - Compatible with a wide variety of devices and virtual training applications, including Rouvy, Zwift, TrainerRoad, and many more. Contact us with questions about compatibility with other software. - Over the air (OTA) firmware updates via Bluetooth devices ensures the M2 is up to date. - Some assembly required - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - ANT+ and BlueGiga USB dongles sold separately - Not compatible with CycleOps- or Saris-branded 20/24" wheel adapter
Adjust resistance on Mag trainer without leaving the saddle. - Quick Release mounting system fits most stems. - For use with the Mag bike trainer only
- Includes clutch knob and L-bolt - Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer - Watch our video to learn more
Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Keep your handlebar organized and your devices secure with the LW-STD (22.2/25.4/28.6mm) from Minoura. - Alloy clamp for mounting your own device on handlebar or stem - Lightweight and rustproof aluminum construction - Hex wrench required for instillation and removal - Clamp body has (1) M5 Thread hold in center - 22.2 mm-28.6 mm diameter range
The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles. - Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media - SM clamp easily mounts or dismounts from the handlebar or tube - Spring-loaded clamp system is simple to use and securely holds your device in place - Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system - Can mount to your repair stand so you can easily reference the Internet when working on your bike
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our absorbent Sweat Guard is designed to keep your carbon, aluminum and steel frame and components safe from corrosive sweat while mimicking your favorite spin class at home. And because your cycling training plan asks for incredibly intense efforts, the Sweat Guard ensures not a drop of sweat will hit your frame during leg-busting intervals. Add a Floor Mat to your indoor cycling collection and you’ve got a training party! - Ultra absorbent terry cloth material - Protects carbon, aluminum, and steel frames and components - Adjustable to fit most any bike - Simple setup and removal with Velcro handlebar mounts and elastic seatpost strap - Machine washable, cold
Page 1 of 2 Next page