Cables

- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually

Hydraulic hose with banjo fitting for TRP brakes.

- Galvanized steel inner wire - Standard 5mm brake housing - Front or Rear

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Galvanized steel inner wire - Standard 5mm S.I.S. housing - Front or Rear - Mountain or road

- Routes cables underneath the bottom bracket - Will not rust or corrode

- Complete cable kits for internal three-speed hubs

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm

Replacement line kit for SRAM and Avid hydraulic disc brakes. - For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1) - 2000mm, black

Original equipment hydraulic hoses for no-compromise brake performance. - Hose Use: Front, Rear - Black - 2000mm hose length - Compatible with SRAM road hydraulic disc brakes

Original equipment hydraulic hoses for no-compromise brake performance. - 2000mm, black

- Time saving system for managing brake cables on Break-Away bikes - Light threaded alloy barrels with rubber noise dampener

- Great for center-pull cantilever brake setups - Fits threadless fork steerer tubes - Includes barrel adjuster - 24mm cable stop drop - AL6061-T6 alloy construction

- Stainless steel die-pulled and polished slick gear cable for smooth, fast, accurate, and reliable shifting - SRAM/Shimano compatible head for both MTB and Road applications - Extra-long 2800mm cable length - Use: Front or Rear - Length: 2800mm - Diameter: 1.1mm

- Sold in pairs - Allen wrench included

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

Straight brake cable featuring a 1.5mm pre-stretched inner cable with a tight coil housing and steel cable ends. Product Specifications - Length: 50" - Weight: 3.4oz

Kink's One Piece Cable system incorporates all the great features found in the DX linear cable and creates a simpler brake cable system requiring minimal setup. The three preset straddle cable lengths fit with all modern frames, and the remaining straddle cable length can easily be trimmed off. This single unit cable system greatly simplifies brake installation, reduces maintenance, and increases braking stiffness. Note: The One Piece Cable system requires a slotted cable guide and cable stop and works best with modern frames using a 245mm cable stop-to-mount distance. Tech Specs - Housing: Coated linear strand - Wire: 1.5mm Pre-stretched slick wire - Length: 50" - Lug: Two-piece bind-free brass - Fits: Frames with 245mm cable stop distance - Weight: 3.0oz

The Kink Linear brake cable features an outer linear strand housing, which greatly decreases bind when the cable twists during tricks. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming. TECH SPECS - Housing: Coated linear strand - Wire: 1.5mm pre-stretched slick wire - Length: 50" - Lug: Traditional cast - Weight: 2.5oz

The Kink Linear DX cable features an outer linear strand housing, which decreases bind when the cable twists during tricks. The custom brass lever lug allows the inner wire to twist freely within the brake lever eliminating twist and bind even further. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming. TECH SPECS - Housing: Coated Linear Strand - Wire: 1.5mm Pre-Stretched Slick Wire - Length: 50" - Lug: Two-Piece Bind Free Brass - Weight: 2.0oz

Jagwire Elite Link housing is the ultimate combination of durability and attention-grabbing looks. Available in six eye-catching colors, they're designed to improve any bike's performance and appearance. The housing uses a series of aluminum links to provide a compressionless system for precise shifting performance. But unlike typical compressionless housing, its flexibility allows for tight bends without kinking. It's also lighter than traditional linear strand shift housing while being more durable. Combine these benefits with Elite, ultra-slick polished cables and Slick-Lube liners, and you've got the best of performance and style. - Precise, compressionless shifting performance combined with extreme flexibility - Each kit comes with links pre-installed on housing segments making setup quick and simple - Ultra-slick polished inner cables minimize system friction - Durable aluminum housing won't kink or rust and is 20% lighter than typical shift housing - Includes enough housing and end caps to reach a rear derailleur or internally geared hub on a typical frame - Bikes with extra-large frames or unusual cable routing may need additional links and/or liners; service parts are available separately

Jagwire 1x Pro Shift kits deliver enhanced performance and style to any bike with a single-chainring drivetrain. A Pro Polished Slick Stainless cable and the Slick-Lube housing liner provide an upgrade over OEM cable systems, with enhanced shifting precision and long-lasting performance. The 1x Pro Shift kit is designed to work with nearly all frames and 1x shifting systems, including most internally-geared hubs. And with small parts included for both road and mountain systems, this kit is quick and easy to install. 1x Pro Shift kits are offered in 10 colors to match Jagwire's Pro Brake and Hydraulic Hose kits. - The Pro Polished Slick cable combined with a Slick-Lube liner offer enhanced shifting precision and long-lasting performance - All parts are included for a complete 1x shift cable and housing installation on either a road or a mountain bike - The kit contains an extra-long inner cable and ample housing for large frames or a continuous housing run - 1x kits are perfect for bikes with only a rear derailleur or an internally geared hub - Black kits contain gloss black housing with silver logos; Stealth Black kits have matte black housing featuring black logos What's Included: - 1x 2200mm LEX-SL Shift Housing - 1x 2800mm Pro Polished Slick Shift Inner Cable - 2x Sealed Alloy End Caps - 4x Lined Alloy End Caps - 1x Hooded Alloy End Cap - 1x Cable Tip - 1x 5G Tube Top - 3x Cable Donuts - 1x Rotating Hook

A great replacement for OE cables and a perfect way to bring style to a bike, our 2x Sport Shift kits make it easy. They come with weld-cut single-ended Slick Stainless cables for easy installation with modern SRAM and Shimano shifters. The included housing uses our Slick-Lube liners to reduce friction, providing shifting precision and long-lasting performance. This 2x kit is designed for use on bikes with both front and rear derailleurs. - Single-ended shift cables are compatible with SRAM and Shimano shift levers for both road or mountain bikes - Sport Slick Stainless cables combined with Slick-Lube liners offer dependable shifting performance and durability - Includes everything needed for a complete shift cable and housing replacement for front and rear derailleurs - OEM-level cables and housing with high-quality small parts

The Elite Sealed Shift Kit uses a continuous liner that seals the system completely protecting it against dirt, mud and other contamination. Available in three colors, this system offers the ultimate combination of protection and low-friction performance. To ensure the best possible performance, we've paired Elite Polished Ultra-Slick inner cables with our improved Slick-Lube continuously-lubricated liners. This combination delivers precise cable movement and excellent durability. - The continuous liner running from the levers to the derailleur offers outstanding protection from dirt and debris - Elite Polished Ultra-Slick cables are paired with Slick-Lube liners to minimize friction - Lightweight XEX shift housing is nearly 30% lighter than traditional shift housing - 5.0mm shift housing and 1.9mm inner liner may not be compatible with all frames and components What's Included: - 1x 3200mm XEX Shift Housing - 2x 2300mm STS-EL Elite Polished Ultra-Slick Shift Inner Cables - 2x 2225mm Slick-Lube Liners - 2x LEX-SL 4mm Shift Housing Segments, 300mm - 4x Open Brass End Caps - 7x Open Alloy End Caps for 5mm Housing - 2x Open Alloy End Caps for 4mm Housing - 2x Pro Indexed Inline Adjusters (4mm/5mm) - 2x Housing Connectors (4mm/5mm) - 2x Cable Tips - 2x Grub Seals - 2x 5G Tube Tops - 2x Rotating Hooks

Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have fluted, rubber-coated rings for easy turning by hand.

Road Pro Brake kits offer enhanced performance and style. Like Road Pro Brake kits, Mountain Pro Brake kits are sold separately from our Pro Shift kits so you can create the best color combination for your bike. Pro level polished brake cables used with our Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all needed parts included, Jagwire's Mountain Pro Brake kits are easy to install. - Pro level polished cables combined with Slick-Lube, Kevlar reinforced housing enhance braking performance - All parts needed for a complete brake cable and housing install on road bikes are included - Kits provide longer housing and cables for large frame with full housing or mechanical disc brakes

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. - Allow the easy installation of Jagwire hose with Shimano disc brakes - Kits contain enough hardware for both front and rear brakes - Requires Jagwire Mountain Pro Universal Disc Brake Hose Kit for installation Compatibility - HFA312: Shimano XTR M975, Deore XT M775, SLX M665, LX T665 and M585, Hone M601, Deore T615, M595, M535 and M525, Alfine S500 and S501, Metrea U5000, Alivio M4050, Acera M3050, and Non-Series T605, MT500, M575, M486, M485, M446, M445, M395, M365, and M355 - HFA314: Shimano Dura Ace R9120, R9170, R9180 and Ultegra R8020, R8070

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Tektro brakes and includes enough hardware for one bicycle.