Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Chainrings

$81.95
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability.
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.
Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability.
Compatibility
These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings.
Specifications:
- Boost: 3mm offset for 52mm chainline
- Mount type: Direct Mount for SRAM
- Offset: Boost
- Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

$79.95
Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings.
- Elliptical rings provide smoother, more efficient pedal rotation, which means better traction
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Not compatible with the SRAM RED and Force AXS 8-bolt interface
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended
- 0mm offset is designed for BB30 short spindle cranks (49mm chainline)

$14.95 - $19.95
Wolf Tooth designed these bolts to be the best on the market. They have a 4mm hex socket and are 10mm long so you can use a bash ring with your chainring that has threaded standoffs like the Wolf Tooth 104 BCD 30t ring, Elliptical 104 BCD rings, 76 BCD rings and others. No nuts are included with these bolts as they are intended for use with threaded chainrings. These work great with Wolf Tooth or any other brand threaded M8 x 0.75 chainrings.

$15.00
- DualHex kits: 5mm-broach bolts with 6mm-broach nuts for secure 2-wrench assembly
- Triple kit can be used on 5-arm or 4-arm mountain/road cranks (includes 5 inner chainring bolts in addition to middle/outer bolt/nut set)

$25.00 - $91.00
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.
- 104mm BCD
- Material: Aluminum

$30.00 - $35.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.

$30.00 - $35.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.

$16.99
• Triple-chainring replacement for one-piece crank
• Durable steel construction
• Chain guard
• 48/38/28-teeth chainrings

$18.00 - $114.00
- Drivetrain Speeds: 11
- Chainring BCD: 110 Shimano Asymmetric
- Material: Aluminum

$53.99 - $136.00
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
- Nickel plated Duraluminum for durability (SIS compatible)
- Always match E type large ring with E type small rings

$25.00
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

$19.00
Shimano Ultegra 6700/6750 10-Speed Chainrings
- Material: Aluminum
- Ring Position/Type: Inner
- Chainring BCD: 130

$18.00 - $154.00
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

$13.00 - $158.00
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

$22.00 - $182.00
Shimano Ultegra R8000 Series Chainrings are designed for use with Shimano's 11-speed Ultegra crankset.

$89.00 - $101.00
Mud and moving parts are enemies in the sport of cyclocross. That's why SRAM decided they were going to simplify things. Remove the front derailleur, increase the range of the cassette, make dropped chains a thing of the past, and you've got a cross drivetrain worthy of hammering. SRAM's CX1 X-Sync Chain Ring is an integral part of that system. It mates to 110 BCD cranks and features a wide-narrow-wide tooth profile to securely hold the chain through the roughest terrain. It's also specially designed with mud clearing in mind to keep your rig light and fast. A variety of sizes ranging from the spin-to-win 38T to the flat-out 46T let you dial in your rig for your strengths or course.

$43.00 - $151.00
- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear
- Specially designed tooth profiles for improved wear
- More durable finish
- Bolt Circle Diameter (BCD): 107 BCD
- Speeds: 12
- Material: Aluminum

$72.00 - $93.00
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

$72.00 - $93.00
Original equipment on SRAM and Truvativ cranks, they also work well with other drive trains.
- Supplied in TruVativ packaging
- No retention pin, use with guard

$74.00
Replacement PowerGlide rings for 11 speed crankset.
- Compatible with Asymmetrical Yaw front derailleurs
- Bolt Circle Diameter (BCD): 110 BCD
- Material: Aluminum

$881.00 - $1,452.00
- AXS enabled for easy monitoring and firmware upgrades
- Fully integrated power meter into a direct mount chainring
- Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride
- Power balance measures left and right legs separately
- SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control
- Laser-etched chainring finish is more durable
- 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks.
- Speeds: 12
- Chainring material: Aluminum
- Power Meter Type: ANT USB

$323.00
X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear.
- Updated tooth profiles for improved wear
- One-piece construction for faster, smoother, more secure shifting
- More durable finish
- Direct Mount
- Material: Aluminum

$24.00 - $26.00
SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

$24.00 - $63.00
Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains.
- 7000 series aluminum provides strength and durability
- 130mm BCD

$63.00 - $104.00
SRAM X-Sync Road Direct Mount Chainrings for Rival drivetrains feature a wide-tooth, narrow-tooth design to provide maximum chain control.
- SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control
- Laser-etched chainring finish is more durable
- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear
Specifications:
- Round or Oval: Round
- Direct Mount Type: Direct Mount SRAM
- Tooth Count: 38
- Material: Aluminum
- Ring Position/Type: Chain Retaining Single Ring
- Drivetrain Speeds: 12

$99.00 - $153.99
Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear.
- X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise.
- Designed to be used with Eagle chain
- Non-Boost 6mm offset

$264.00
- SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control
- Laser-etched chainring finish is more durable
- X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear
- Improved aerodynamics for time trial and triathlon
- Material: Aluminum