29"

- The everyday tire for grip on mixed and soft terrain - Inspired by racing technology - Tread pattern inherited from the MICHELIN Wild Racing tires ensure grip and agility

- Urban tire with road tread pattern - 5mm thick anti-puncture protection layer

- A tire that is exclusively designed to be ridden in bike parks. - It takes many of the same technologies from the rest of the range but using a more durable compound to give it a longer lifespan for those extra laps of the park.

The Force XC2 Performance Tire is ready for light-duty trail exploring. - Grip on varying trails thanks to the MICHELIN Gum-X technology and the Force XC2 Racing Line tread pattern - Light and resistant thanks to the 3x60 TPI casing with puncture protection provided by the high-density fiber layer under the tread - The XC tire is designed to enhance your light trail riding adventures

- Maximum grip on soft and mixed terrain thanks to the wide-spaced studs and Gum-X technology - Light and resistant thanks to the 3x60 TPI casing with puncture protection provided by the high density fiber layer under the tread

- The MICHELIN FORCE XC2 tire enhances control in a wide range of riding conditions thanks to the updated tread pattern with taller, wide-spaced knobs. - Gum-X compound optimizes the balance between rolling efficiency and traction. - Cross Shield 2 casing provides extra pinch protection designed to prevent tread and sidewall damage.

- The next generation MICHELIN XC race tire that gives you acceleration & momentum - Used by our cross country pros for racing at the highest level! - More speed thanks to its semi slick tread pattern - Gum-X compound optimizes the balance between rolling efficiency and traction - Cross Shield2 casing provides extra pinch protection designed to prevent tread and sidewall damage

The Wild XC Performance tire provides everyday confidence with an inspiring grip. - Maximum grip on soft and mixed terrain thanks to the wide-spaced studs and Gum-X technology - Light and resistant thanks to the 3x60 TPI casing with puncture protection provided by the high-density fiber layer under the tread - The XC tire designed for down-country riding

Thanks to its Trail Shield Technology, a strong and resilient mix of a 3x60 TPI carcass, and a reinforced, high-density casing, the MICHELIN Force AM tire is extra tough and durable and therefore perfect for trail and All Mountain riding. - Offers improved grip and propulsion as well as excellent braking thanks to its mix of three rubbers. - Tubeless Compatible - Tire Bead: Folding

The next-generation Wild XC Race tire provides more grip on loamy courses. - Tread design provides maximum braking and responsive cornering inspired by Wild Enduro ranges - Gum-X compound optimizes the balance between rolling efficiency and traction - Cross Shield 2 casing provides extra pinch protection designed to prevent tread and sidewall damage - The tires are chosen by pros for XC racing at the highest level on loamy courses

- A fast tire on hard-packed terrain - Tread pattern design reduces rolling resistance - Gum-X technology optimizes grip on hard terrain - Light and robust Gravity Shield casing

The Wild AM2 Competition tire features more grip for mixed and soft terrain. - Wild AM² tread pattern combined with Gum-X technology delivers maximum grip when cornering and excellent braking performance - Light and robust Gravity Shield casing

The E-Wild features a new generation of top-of-the-range compounds that give better rolling strength and increased efficiency, for more miles of riding. - More grip: Optimal grip with its lateral and central compounds designed to optimize motricity, even on climbs, and transmit the bike's full power - Extra protection: Based on its Pinch Protection technology, which absorbs the energy from pinch flats and its Gravity Shield casing from the Enduro competition range - Same tread design for both Front & Rear, but the rear-specific tire is reinforced for added puncture protection, making it heavier but more robust

The E-Wild features a new generation of top-of-the-range compounds that give better rolling strength and increased efficiency, for more miles of riding. - More grip: Optimal grip with its lateral and central compounds designed to optimize motricity, even on climbs, and transmit the bike's full power - Extra protection: Based on its Pinch Protection technology, which absorbs the energy from pinch flats and its Gravity Shield casing from the Enduro competition range - Same tread design for both Front & Rear, but the rear-specific tire is reinforced for added puncture protection, making it heavier but more robust

If you load your bike with heavy cargo or need an extra bit of traction for an extended haul, the Tour Guide Tire is your beast of burden! Its shoulder-to-shoulder sipes, combined with a thick tread cap, and puncture protection equip this tire with reliability for conditions most cyclists would not attempt to conquer. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

Stare down rough terrain with this burly yet sleek tire. The Utility Player offers comfortable off-road exploration with modern, openly spaced treads and wide 2.25-inch casing. A broad spectrum of diameters gives you choice for fit. You still standing there? - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

The Maxxis Ardent is a light duty trail tire that rolls fast in dry conditions. For similar rolling speed with improved braking and cornering performance, check out the Rekon.

Lightweight freestyle tire - BMX and urban assault options - Fast-rolling tread design - High-volume casing The Grifter is our most popular freestyle tire, and for good reason. The tread pattern rolls fast to help you keep your momentum, and the high-volume casing softens landings. The Grifter is perfect for BMX and urban assault.

The Maxxis Ikon is a versatile XC tire designed to perform in a broad range of conditions. With its predictable handling, the Ikon is also a favorite among our slopestyle athletes.

- The new incarnation of the Minion DHR. Ready to shred any line - Excellent cornering traction - Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo! - Plus sizes available - Wide Trail casing optimized for 30—35mm rims

The Rekon is a light duty trail tire designed to go fast in technical terrain.

The Maxxis Rekon Race is a semi-slick XC race tire that features the lowest profile tread in our XC line. It is a great choice for dry XC trails and short track racing.

Tough enough for the meanest streets - Durable enough for urban assault, park riding, commuting, cargo bikes, etc. - Grooved slick tread design - Wrap-around tread pattern As the original urban assault tire, we designed the Hookworm to take the abuses of the most aggressive street riders. Bead-to-bead tread provides durability and traction whether you're dropping staircases, grinding rails, or riding in your local skate park.

Light up the track or street with the Torch! - Grooved slick center tread - Lightweight construction - Textured cornering knobs Originally designed as a race tire for modern BMX tracks, the Torch brings the heat to your competition.

The Ikon is a lightweight, high volume XC tire that rolls fast and has ample tread to provide secure traction in varied conditions. - Ramped center knobs roll fast and provide excellent traction for climbing and braking - Progressive shoulder lugs deliver secure traction in the corners - Intended use: hardpack, loose, loose over hard, medium - MaxxSpeed is a high-silica content compound that reduces rolling resistance while also enhancing traction in wet conditions - EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

With a tread design that deftly balances rolling speed with braking and cornering traction, it’s no wonder why the Minion DHF is one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there’s a Minion DHF spec to meet your needs.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims - DH casing features 2 ply 60 TPI construction with a butyl reinforced sidewall for maximum durability With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

The Assegai tire is designed primarily for downhill racing and aggressive trail riding in mixed conditions. The knob height falls between the Minion DHR II and the Shorty. Like the Minion tires, the center knobs are heavily ramped on the leading edge to reduce rolling resistance. A small knob located between the center tread and side knobs provides a smooth transition while cornering. The Assegai offers predictable traction, even over slippery roots and rocks. - World Cup Champion Greg Minnaar's signature tire - EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible - Wide Trail (WT) construction optimizes the tire’s tread layout and profile on today’s modern, wider rims, optimized around a 35mm inner width

Designed for speed, revised for control - Open-side knob design for versatile cornering - Tightly packed center knobs for speed over hardpack The CrossMark II improves on the speed of its predecessor while improving grip in intermediate conditions. The legendary center ridge still flies on hardpack, and the updated tread pattern provides better braking and cornering over a wide range of trail conditions. A great choice if you want to go fast everywhere.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

The Maxxis Forekaster features a spiky, well-spaced tread pattern that is ideal for XC racing or light duty trail riding in loose or wet conditions during the spring and fall. Use as a front paired with an Aspen or Ikon rear for an “aggressive” XC setup.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Pick up the Pace! The Pace was designed to meet the needs of our World Cup XC racers. The Maxxis Pace uses small, tightly spaced knobs to create a tire with low rolling resistance. While originally intended for XC use, the Pace has proven to work well for slopestyle, pump track, and dirt jumping. - Ideal for hardpack XC courses - Low-profile tread design A high-volume, low-profile tread design offers minimal rolling resistance and consistent traction across the profile of the tire. Continuous side knobs keep you planted where traction is critical, and the single compound balances traction and tread wear.

The Maxxis Rekon Race is a semi-slick XC race tire that features the lowest profile tread in our XC line. It is a great choice for dry XC trails and short track racing.

High-volume casing, low-profile tread - Aggressive side knobs - Dual Compound - Lightweight XC race tire - Race-inspired low profile design Maxxis has done it again with its latest XC race tire. The new Maxxis Aspen pushes the limits of a lightweight XC tire designed to have minimal rolling resistance. The Aspen is designed with a high-volume casing to smooth out the roughest roots and rocks, while the dual compounds give optimal traction in the corners. So, if crossing the finish line first is your top priority, then the Aspen was designed for you.

- Ideal for use on dry, fast trails and bike parks - Centerline tread ramped to minimize drag, but retain sharp, flat edges along the back to provide strong braking traction - Small sipes in the knobs additional flexion, increasing their surface area during braking and aiding the transition to the edge blocks when cornering - Ample spacing between lugs helps clear debris - WT: Wide trail casing is optimized for 30-35mm inner width rims - EXO: additional densely woven, lightweight, flexible fabric added to casing for enhanced puncture protection - TR: tubeless ready - Dual compound rubber optimized for longevity and performance - Width: choose; 2.4", or 2.6" - Compound: dual - Bead: folding - Casing: 60tpi - Weight: 912g. (2.4"); 1,010g. (2.6")

The Aspen ST is an ultra-low-profile race tire designed primarily for short-track XC use. Sometimes referred to as the "Fastpen," this tire is sure to give any racer an edge in dry conditions - Rubber: MaxxSpeed - Wide Trail (WT) sizes are optimized for 30mm inner width rims - Tubeless Ready (TR) - Category: XC Race - Recommended Uses: Dry XC Conditions - Recommendation Installation: Front or rear

The Aspen is a lightweight XC tire that is designed to roll fast and still provide enough traction to keep you going when the trail gets rough. - Low profile tread design rolls fast and still delivers grip for climbing and braking - Aggressive side lugs dig into soft terrain to provide additional cornering traction - Intended use: hardpack, loose over hard, medium - MaxxSpeed features a high-silica content compound that reduces rolling resistance while also enhancing wet traction - EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible - Team-spec tires feature a lighter, faster, and more supple 170 TPI casing for the lowest weight possible, with a reduction in durability

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

The Maxxis Ikon is a versatile XC tire designed to perform in a broad range of conditions. With its predictable handling, the Ikon is also a favorite among our slopestyle athletes.

The Ikon is a lightweight, high-volume XC tire that rolls fast and has ample tread to provide secure traction in varied conditions. - Ramped center knobs roll fast and provide excellent traction for climbing and braking - Progressive shoulder lugs deliver secure traction in the corners - Intended use: hardpack, loose, loose over hard, medium - MaxxSpeed is a high-silica content compound that reduces rolling resistance while also enhancing traction in wet conditions - EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible

- Gen 2 Revised tread pattern - New knob layout based on feedback from World Cup DH and EWS riders - "Doublewide" knob now split into two individual knobs - More supportive cornering knobs - Additional siping to enhance braking and cornering traction - Raised ridges on casing to promote mud clearing

After gathering years of data and feedback from our World Cup Downhill and Enduro World Series athletes, the Shorty was redesigned in 2021. The knob layout has been altered to improve wet traction, cornering performance, and mud shedding abilities. The narrower 2.40? casing improves frame and fork clearance for when things get really sloppy and reduces weight.

The second generation of the legendary High Roller - Easily clears debris - Open tread design - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims An open and aggressive tread design gives the High Roller II excellent soil penetration and mud-clearing ability. A square profile provides a solid, consistent feel across the knobs. Modified knobs on the shoulder and center improve braking performance and traction on hard surfaces. An excellent choice for technical, loose terrain.

The Aspen is one of Maxxis' premier XC race tires. A low center tread height allows the Aspen to roll quickly but substantial – for XC – side knobs provide cornering traction - Lightweight XC race tire - Features a high volume casing, low profile center and aggressive side knobs - EXO: additional densely woven, lightweight, flexible fabric added to casing for enhanced puncture protection - TR: tubeless ready - MaxxSpeed: new MaxxSpeed (2023) is a top-shelf rubber compound for XC racing. It’s a high-silica content compound which reduces rolling resistance while also enhancing wet traction - 170tpi casing - Compound: MaxxSpeed Silica - Bead: folding - Tire Type: tubeless ready - Weight: 650g. (29x2.25")

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

The original Forekaster was designed as a wet weather option for XC, while the new version is aimed squarely at modern short travel (100mm-130mm) trail bikes - aka the “downcountry” segment. Intended to be a “Goldilocks” tire, the new Forekaster rolls fast but also provides solid cornering and braking traction in a broad range of trail conditions.

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Designed in conjunction with Aussie DH racer Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear depending on trail conditions.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

The legendary High Roller returns with an all-new hybrid tread design, but the same old winning ways! Developed with extensive input and testing from Maxxis' World Cup athletes, the third generation of the High Roller is built to take on mixed conditions at high speeds - The third gen High Roller slots into the Maxxis gravity range between the Assegai and the Shorty - Widely-spaced tread clears debris better than the Assegai and it performs better in drier conditions compared to the Shorty - Built to take on mixed conditions at high speeds - Center tread uses a mid-spike design similar to the Shorty but with a lower knob height - Knobs provide excellent soil penetration in soft, loose, or dusty conditions while remaining stable enough to prevent squirm on hard surfaces - Cornering traction is enhanced via large, well-supported side knobs for predictable handling - A versatile choice when conditions are soft or loose, but don’t quite warrant a mud spike - All Maxxis tires 2.40" and up are considered WT according to Maxxis whether or not they are labeled WT - 3C MaxxGrip: the ultimate in grip and slow rebound properties for unparalleled traction in downhill applications - DD: Designed for Enduro racing and ebike use. Two layers of lightweight 120 TPI casing material are combined with a butyl sidewall insert to create a highly durable tire with more trail feedback than a Downhill casing tire - TR: Tubeless Ready means the ability to run lower pressures, improving traction, lowering rolling resistance, and less chance of flatting - Recommended installation: Front or rear - Tire Diameter: 29" - ISO Diameter: 622 / Mountain / 29er - Labeled Size: 29 x 2.4" - Casing: 60tpi - Max Pressure: 50psi - Bead: folding - Weight: 1,299g. (29 x 2.4")

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The DHR II is the gold standard for riders wanting maximum traction and cornering grip when trail conditions get loose and muddy. - Ramped paddle-shaped center knobs roll efficiently and provide excellent traction for climbing and braking - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium - 3C MaxxTerra is an intermediate triple compound that provides additional grip but still retains excellent tread wear and rolling resistance qualities - Downhill casing tires are designed for extreme use in all gravity applications, made with two layers of durable 60 TPI casing material along with a large butyl rubber insert that extends from each bead into the sidewall