The Genuine Innovations deluxe kit offers a complete CO2 bicycle tire repair and inflation solution for all your flat tire needs. Comes with everything needed to repair and inflate multiple flat tires, all packed in an easy-to-store zippered wallet. Featuring the popular Ultraflate cupped inflator, this deluxe repair kit is so quick and easy to use, you'll be back to riding your bike in no time! - Repair and inflate multiple tires - Quick inflation - Compact and stores easily - Full kit weight: 292 grams - Compatible with non-threaded 20 gram CO2 cartridges and threaded 16 gram, 20 gram and 25 gram CO2 cartridges - Works with both Presta and Schrader valves - Store a non-threaded 20 gram CO2 cartridge in the cup Includes: (1) Ultraflate inflator with trigger-controlled technology (3) 20 gram non-threaded CO2 cartridges (1) Small patch kit (6 patches and 1" square sand paper) (2) Tire levers (1) 5.5" L x 6.5" W padded, zippered wallet

Don’t leave home without it. Genuine Innovations' Tire Repair & Inflation Wallet has everything you need to repair a flat tire, packed in a wallet that fits in a jersey pocket. No seat bag required. After patching your damaged tube, inflation is a breeze. Twist-to-inflate technology makes this easy to use. Fully controllable, just thread a cartridge onto the CO2 bicycle tire inflator, tighten until the cartridge is pierced, press the nozzle onto the valve, then twist the cartridge to release the gas into the tire. Takes only seconds to fill your tire and be back on the road. • Includes Microflate Nano CO2 inflator • Includes two 16 gram threaded CO2 cartridges • Includes one small patch kit & two tire levers • All packaged in a 3.5 x 4.5-inch nylon zippered wallet • Works with both Presta and Schrader valves • Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (each sold separately) • Construction: Glass reinforced nylon with brass internals. • Weight: 23 grams

Most compressors have a regulator dial to pre-set maximum pressure. Prestacycle's new Digital Gauge lets you set your inflation pressure to within 1/2 psi for incredible tire inflation accuracy! Has standard 1/8-inch threads that fit most air compressor regulators. Also fits some floor pumps that accept replacement gauges! (Does not fit directly onto a Prestaflator tool) 2 1/3-inch diameter with rubber casing for protection. Deep 1/8-inch Brass threads for maximum compatibility. 0-300 psi (20 BAR). 0.5 psi increments to 100 psi, 1.0 psi increments to 300 psi. Backlight & Auto-on / Auto-off.

Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.

Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.

Extend the hidden hose on Bontrager's Air Support HP Pro pump, and thread it onto your Presta valve for secure inflation of your tires. Built with a smaller volume chamber for higher-pressure tires, this premium pump allows you to effortlessly inflate tires up to 120 psi. Available in two lengths: Long for more air per stroke, or Short for an easy fit into a jersey pocket.

If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the original lever, no problem, here's the replacement part to get you back up and running.

The new Prestaflator Digital is made possible by Prestacycle's new Rapid Response Digital Gauge. During inflation, the gauge is capable of showing immediate changes in pressure, enabling fast inflation – now with supreme accuracy. The gauge uses highly accurate, non-wearing circuitry for pressure readings, so it does not wear-out or loose accuracy like traditional Dial gauges. Highly accurate readings are across the whole range, making this tool excellent for Fat Tire, Cyclocross, MTB as well as Road Bikes. Easy Tool-less replacement of the two CR2032 batteries (included).

The original – Prestaflator! The Prestaflator is designed with a long-throw trigger valve. Use a light squeeze or brief, rapid shots to gently inflate Bike tires to your desired pressure over a few seconds. A full squeeze on the trigger provides maximum pressure for seating tubeless tires. The dial pressure gauge lets you follow your progress visually. Designed for MTB & Road tires with a wide range of pressure requirements.

Inflate tubeless tires at home and on the road with Bontrager's Flash Charger TLR, a pump designed for efficient installation of tubeless-ready tires, all without the use of a compressor. • Alloy barrel for smooth pump action • Auto-Select head effortlessly fits Presta or Schrader valves • Top-mounted 160 psi gauge • Three-arm base gives excellent stability • Inflates tubeless-ready tires without a compressor

Get the convenience of CO2 inflation in a super-small pump that can be carried anywhere with Specialized's Cpr02 Pump. This little inflator boasts speedy, controlled inflation with the power of compressed CO2 and uses threaded cartridges

- MSW threaded CO2 Cartridges fit all MSW inflator heads as well as non-MSW inflators - 38-gram threaded cartridges are sold individually

These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.

These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.

The Phil Hose offers the speed and convenience of CO2 inflation plus the accuracy of a pressure gauge. The Smooth Regulator valve and inflator hose with a built-in 40-100 psi pressure gauge make inflating your tire a breeze. - Flexible hose with inline gauge makes for quick, easy, and accurate inflation - Precise and easy to read 40-100 psi gauge - Fits Presta and Schrader valves without adaptors - Smooth Regulator valve for precise inflation and safety - Without a cartridge use it as a tire pressure gauge - Compatible with threaded cartridges - Includes a 16g CO2 cartridges & insulator sleeve - Length: 180 mm - Weight: 102 grams

The most intuitive CO2 inflator on the market. All you have to do is twist your favorite CO2 cartridge into the HammerHead, and at the push of a button, you're back on the trail. As an added bonus, the HammerHead automatically detects your valve type for instant valve attachment while the trigger head leverages our patented push-to-inflate technology. - Easy and controllable inflation - Push-to-inflate technology - Auto detect head for instant Presta or Schrader valve attachment - Lightweight, compact design - Weight: 26 grams Includes: (1) HammerHead inflator (1) threaded 20 gram CO2 cartridge

Specialized's Air Tool MTB Pump packs a wallop. Equipped with a durable, lightweight aluminum body, handle and shaft, this compact pump easily fits in a pocket or pack, and sports a large-volume barrel that inflates mountain bike tires quickly. The Air Tool is compatible with Presta and Schrader valves and has a thumblock head with a sturdy stainless-steel lever. Featuring a handy storage chamber for patches, the handle locks with a simple twist. There's even a handy mounting bracket that attaches to your bottle-cage screws.

Show flats no fear with Bontrager's Air Support pump. Built for the lower-volume tires on your commuter, cruiser or town bike, but can handle road and mountain tires, the Air Support is great for topping off your pressures or fixing that unfortunate flat. The auto-select head uses a fold-out lever to lock securely to Schrader or Presta valves for quick and easy inflation up to 80 psi.

MSW Windstream Inflator Head is a push on inflation system. Compatible with all 3/8" threaded compressed gas cartridges. Works with Presta and Schrader. - Compact design for easy storage - Alloy construction for durability and lightweight - Press on for both Schrader and Presta valves - Compatible with all 3/8" threaded compressed air cartridges

The Genuine Innovations 20-Gram Threaded CO2 Cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread. The 20-gram size will fully inflate those high-volume mountain bike tires (29er, DH, etc.).

Ultimate flexibility is a hallmark of the Ninja series, and Ninja CO2 is no exception. Mount it to your bike with most water bottle cages to match the aesthetics that best suit you. The included Micro AirBooster and 2 threaded 16g CO2 cartridges make fixing flats easy with quick access by a simple twist. - Material: Aluminum / Engineering grade plastic - Inflator Head: Presta / Schrader Push to inflate - Inflator Material: CNC aluminum - Compatibility: Non-adjustable water bottle cage - Added Features: 2 threaded 16g CO2 cartridges Compartment for CO2 inflator & cartridges - Size: 16.7 x 9.3 x 5.4 cm / 6.6” x 3.7” x 2.1” - Weight: 191 grams

These 16-gram cartridges can be used with Genuine Innovations' Second Wind MTB, Ultraflate and Proflate models as well as other cupped inflators.

These 16-gram cartridges can be used with Genuine Innovations' Second Wind MTB, Ultraflate and Proflate models as well as other cupped inflators.

Genuine Innovations' AirChuck Elite offers Push-To-Inflate technology for fast, easy & controllable single-handed CO2 bicycle tire inflation! • Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (not 45-gram cartridges) (each sold separately) • All metal aluminum design • Easy to use and fully controllable • Push-to-Inflate technology • Works with both Presta and Schrader valves • Includes one 16 gram and one 20 gram threaded CO2 cartridge • Weight: 16 grams

Easy to use, easy to control and affordable. The Mircoflate Nano gives you the best bang for your buck when it comes to quality and ease of use. Simply thread on your favorite CO2 cartridge, twist the cartridge off slightly to engage inflation and tighten it back on to shut it off. Petite power! - Compact and nearly indestructible - Easy to use and fully controllable - Patented twist-to-inflate technology - Press on to both Schrader and Presta valves - Compatible with 16 gram, 20 gram and 25 gram threaded CO2 cartridges Product includes: (1) Microflate Nano inflator head (1) threaded 20 gram CO2 cartridge

The Portland Design Works Fatty Object is the first CO2 inflator on the market designed specifically to inflate fat and plus-sized tires. Made of indestructible alloy, the Fatty Object fits on both Presta and Schrader valves and its oversized control knob is easy to operate, even with gloves on. The Fatty Object comes with a 38g threaded CO2 cartridge a lightweight foam insulator sleeve that will fill a 26x4.8 tire to 6-7psi or a 29x3.0 tire to 20-22psi. - Precision-machined body - Fits Presta and Schrader values - 38g threaded CO2 cartridge which fills a 26x4.8 tire to 6-7psi or a 29x3.0 tire to 20-22psi - Inflator only height: 44 mm (1.75") - Inflator only weight: 40g (1.3 oz)  - Foam insulator sleeve length: 77mm (3") - Weight of inflator with cartridge: 80g (6.9 oz) - Instruction manual (PDF) - Lifetime PDWarranty

There's no reason to walk home when you have Bontrager's Air Rush Road pump. It's a clever 2-in-1 CO2 inflator and mini pump combo. Its compact size stows away in your jersey pocket and it's light enough that you won't even notice it. Plus, it has a regulator for safe, controlled inflation.

Genuine Innovations' Proflate is their flagship CO2 inflator. From their EZ Connect Technology to their built-in all-weather nozzle cover, the Proflate is loaded with features that make inflation safer and easier. Simply drop the cartridge into the cup (or screw cartridge into the head of inflator), attach the head, press onto valve stem, pull trigger, and begin controllable inflation. Easy enough to use with one hand, it will get your tire up to your desired pressure in seconds. You’ll be back to your ride in no time. • Trigger Controlled technology for fast, easy and controlled CO2 inflation • Built in Trigger Lock prevents accidental discharge • Built in dirt/water cover • Pressure detection features • Valve interface: Easy connect/Auto-detect head that automatically grips valve when inflation starts • Includes two 16 gram non-threaded CO2 cartridges • Cartridge compatibility: 12 gram threaded, 16 gram threaded & non-threaded, 20 gram threaded, 25 gram threaded (Does NOT work with 12g non-threaded or Big Air!) (each sold separately) • Construction: Glass reinforced nylon with brass internals • Weight: 57 grams

Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. It includes a control knob to keep you in charge of the pressure and a threaded Co2 cartridge with a neat leather sleeve. And, it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz)  - Leather sleeve length: 55 mm (2.25") - Weight of inflator with cartridge: 80 g (3 oz)

Planet Bike's Red Zeppelin CO2 bike tire inflator features rugged metal construction and the Airflation control knob for reliable and accurate inflation. It accepts all sizes of threaded cartridges and the inflator head threads directly onto either Presta or Schrader valves without an adapter. It'll make quick work of roadside repairs. - Precision-machined body and head with Airflation Control 2.0TM knob for improved reliability and ease-of-use - Threads directly onto Presta or Schrader valve without adapter - Compatible with threaded cartridges - Small size fits in saddle bag or jersey pocket - Size: 48 x 40 x 25 mm - Weight: 56 grams