Apparel

The all-new S-Works Ares 2 is the ultimate shoe for racers looking for the most positive, locked-in feel without sacrificing comfort. Engineered with our Body Geometry methodology for power, comfort, and pedaling precision—delivering a 7-watt power increase while reducing forefoot pressure by 44%. The S-Works Ares 2 is the pinnacle of race footwear—redefined. - Use – Road racing. - Body Geometry Last – All-new Body Geometry last reduces forefoot pressure by 44%. - Outsole Material – Unidirectional carbon. - Fit System – BOA® Li2 Fit System. - Weight – 263g for a half-pair, size 44

The all-new S-Works Ares 2 is the ultimate shoe for racers looking for the most positive, locked-in feel without sacrificing comfort. Engineered with our Body Geometry methodology for power, comfort, and pedaling precision—delivering a 7-watt power increase while reducing forefoot pressure by 44%. The S-Works Ares 2 is the pinnacle of race footwear—redefined. - Use – Road racing. - Body Geometry Last – All-new Body Geometry last reduces forefoot pressure by 44%. - Outsole Material – Unidirectional carbon. - Fit System – BOA® Li2 Fit System. - Weight – 263g for a half-pair, size 44

The MTB helmet trusted by World Cup champions. Designed for the toughest downhill mountain bike runs, the Rampage Pro Carbon Mips® Helmet is full-face, full-gas, and packed with race-ready features and technology that’ll keep your head in the game and your safety on speed dial. When every second counts, you can’t argue with gravity. Lightweight performance and protection for all your downhill runs—you can’t argue with that either. Key Features and Specifications: - Full-face mountain bike helmet - Mips® added protection system is meant to reduce the rotational motion by absorbing and redirecting energies and forces otherwise transmitted to the brain - Breakaway visor screws are designed to sheer off at impact to reduce rotational forces - Dual-density, In-Mold Varizorb™ EPS balances weight with performance and is meant to provide improved protection by spreading forces over a wider surface area - Lightweight carbon fiber shell construction - Injected Mesh vent screens maintain superior ventilation and airflow while shielding the rider from dirt and debris - Removable, washable X-Static® comfort liner and cheek pads are antimicrobial and manage odor while wicking moisture - Structured carry bag with vents and fleece lining Meets EN 1078, CPSC 1203, AS/NZS 2063, and ASTM F1952 Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel Materials: 40% composite, 19% EPS, 16% polyurethane foam/polyester, 8% nylon, 7% Abs+pc

Worn by Sidi's pro athletes, Shot 2S is designed to transfer maximum power while maintaining maximum comfort, so that the focus is on the road. Its carbon C-Boost sole harnesses all the strength of woven fibers, while the upper is made in Bioveg material derived from recycled microfibers with an external finish made from cereal. Its innovative closure is strategically positioned outside the contact areas with other riders, to better manage crowded situations. The heel structure is adjustable to allow the shoes to wrap around the foot easily. Made for professional and all-round athletes. -High-grade Bioveg Microfiber provides a superior feel with an integrated mesh membrane for breathability -Adjustable heel retention for a customizable fit -Double high-density resin dialing system with Dyneema for a strong and secure fit -Sole inserts are engineered for durability

A material advantage Trek RSL Knit Road Cycling Shoe is a forward-thinking engineered knit race shoe that is exceptionally comfortable, breathable, and incredibly fast. Trek RSL Knit Road Cycling Shoe is an all-out race shoe that defies convention. Years in development, this shoe was engineered to provide maximum power transfer and all-day comfort, allowing you to elevate your performance during every ride or race. Engineered performance knit provides a supportive, sock-like fit. All-new METNET relief zones flex in all the right places, while METNET power straps lock in the foot for maximum efficiency. Coupled with a 100% OCLV Carbon plate and two Li2 BOA dials, this shoe is fast, comfortable, and light. - Engineered performance knit provides a comfortable, sock-like fit and excellent breathability - METNET relief zones stretch and conform to the foot to relieve common foot discomfort - Updated Trek Pro Last provides a wider performance fit to better match the average foot - Dual Li2 BOA dials provide low-profile, on-the-fly micro-adjustability for a precision fit - 100% OCLV Carbon plate provides excellent power transfer for optimal pedaling efficiency - Internal heel cup and no-slip heel lining prevent slippage and improve efficiency - Insoles are made with Rise by BLOOM, a bio-based EVA foam replacement - Compatible with 3-bolt cleats

The Sidi Tiger 2S SRS transfers all the muscle power unleashed while maintaining an extreme level of comfort, allowing your mind to focus entirely on the course. The Tecno 3 closure technology is strategically placed to prevent areas of contact with other riders, to better handle crowded situations. The upper is made in Bioveg material derived from recycled microfibers with an external finishing made from cereal The MTB SRS Carbon sole harnesses the strength of the interwoven fibers for energy transfer and its SRS technology allows riders to keep the grip level at a maximum all the times. -The high grade bioveg microfiber makes for a superior touch and greater feeling on the shoe. -And integrated mesh membrane enhances breathability for greater cooling -Integrated toe protectors -Adjustable heel retention allows for a customized feel -Double high density resin dial system with Dyneema makes it easy to find the best fit for the rider -MTB carbon ground sole delivers maximum power -Rubber ground inserts provide unbeatable stability on tough terrain -Sole inserts are engineered for durability

Designed for our professional athletes, the Sidi Tiger 2S efficiently transfers all the power you can unleash while maintaining a high level of comfort, allowing you to focus entirely on the course. The Tecno 3 closure is strategically placed to prevent contact with other riders in crowded situations. The upper is made of Bioveg material derived from recycled microfibers with a plant based external finish. The MTB SRS Carbon sole harnesses the strength of interwoven carbon fibers for efficient energy transfer and its SRS technology allows riders to maintain maximum grip level at all times. -The Tecno-3 Push Flex completely eliminates the pressure zone on the instep and significantly improves the comfort of the closure -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The adjustable heel retention device reinforces the top of the heel cup, closing the back of the shoe securely so the heel doesn't slide out during steep climbs or sprints -The all new Sidi Integrated Heel Cup is light, comfortable and reinforced to avoid deformation -Each side of the heel can be adjusted independently for a perfect fit -The upper part of the toe section is protected with anti-slip rubber to resist and deflect impacts from stones or debris when cycling -The MTB SRS Carbon-Ground Sole raises the standard for mountain bike performance, dropping around 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability -The MTB SRS Carbon-Ground Sole consists of replaceable tread blocks in the toe and heel attached to a medium-modulus carbon sole -The Ground SRS treads and MTB Plate are easily removable and replaceable and the sole is toe-spike compatible -To improve walkability, Sidi cycling shoes include a replaceable polyurethane heel pad

Designed for our professional athletes, the Sidi Shot 2S is crafted to deliver optimal power transfer while ensuring the utmost comfort, enabling athletes to stay focused on the road. Its carbon C-Boost sole harnesses the full strength of woven fibers, while the upper is constructed using Bioveg material derived from recycled microfibers and finished with an external plant-based coating. The innovative closure system is strategically positioned away from other riders, enhancing maneuverability in crowded situations. The adjustable heel retention mechanism allows you to secure the heel of the shoe, tightening the heel so that it conforms to any riders' heel shape. - The Tecno-3 Push Flex closure reduces the pressure zone on the instep and significantly improves the comfort of the closure  - The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel - The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints. Each side of the heel can be adjusted independently for a perfect fit - The all new Sidi integrated heel cup is reinforced to avoid deformation after prolonged efforts and extreme pressure. Anatomically shaped, it stabilizes and supports the foot while pedaling - The C-BOOST SRS Sole is made of the latest generation carbon, designed to conform to the metatarsal area, increasing the transmission of power directly to the pedals, guaranteeing ideal power transfer and support - Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included for determining the riders personal cleat position - Provided with SRS (Sole Replacement System) inserts in Nylon and TPU, with the function of protecting the carbon in the areas most subject to deterioration from use and for increased durability while walking - The SRS inserts are integrated with ventilation holes that promote the circulation of air inside the sole with each pedal stroke

For Dissident II, we collaborated with powerhouse athletes, Loïc Bruni and Finn Iles, to design a helmet that would meet the highest demands of downhill mountain bike racing, in terms of confidence, a modern-styled fit, and breathability.With five strategically placed EPS foam inserts, we’re able to tune for higher and lower density foam based on where it is being configured inside the helmet—allowing us to maintain a light weight and still manage energy. The use of a softer foam density allows more energy to be absorbed in an impact, transferring less to the rider. Dissident II also provides added confidence through its Mips Evolve Solution—that helps to redirect rotational movement away from the head. In this Evolve Solution, we utilized fabric pocket attachments inside, reducing creakiness.Remaining cool is more than a state of mind, and it’s hard to keep your composure when things get hot—specially when your head feels like its in a sauna. That’s why instead of focusing on more vents, we focused on better vents. Built from the inside out, the Dissident II ventilation system features a hood scoop to channel a flow of cool air in, and purpose-placed vents that direct the warm air out—letting your head stay cool and comfortable in any situation.Keeping this helmet light was of high importance. In a race context, feeling light and mobile leads to faster reactions, and reduced fatigue between the tape. With the EPS foam insert construction, the helmet remains very light while still offering big protection. While we can’t speculate on everything that was going through Finn Iles’ head during his 2022 winning run at Mont-Sainte-Anne—we know what he wasn’t thinking about… Whether you’re taking the stage to drop in on your first winning World Cup run, or chasing your own championship on the local enduro series, Dissident II has you covered.For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - 3 Layer Construction: Carbon Shell / Poly Carbonate / EPS. - 5-unique pieces of EPS tuned to optimized performance in each specific location. - Mips Evolve Solution: Fabric pocket attachments to reduce bobble head and creakiness. - Ionic Plus Fabric anti-microbial pad kit. Replacement crown pad and two sizes of emergency quick-release cheek pads included. - Breathability optimized with hood scoop. - Sizes: S, M, L, XL (4 Shell sizes). - Travel Bag. - D-Ring Buckle. - Weight: Medium - 940g.

All the stability you need to perform on uneven terrain. The Sidi MTB Drako 2S SRS is designed for athletes looking for maximum foot stability to unleash all their power. The ventilated carbon sole, with the innovative Firmor lateral support system, combines the force required to transfer extreme energy with superb lateral stabilization of the foot. The dual rotor closure allows for a perfect individual fit, designed to be unstoppable from debris and mud. -The structured microfiber upper improves support and stability -Integrated impact protectors deliver protection without the burden on toes -Adjustable heel retention can be tailored to each ride -Firmor lateral support provides all the stability a rider needs -Dual dials system for precision fitting -The MTB carbon-ground sole ensures this shoe delivers maximum power -Rubber ground inserts offer unbeatable stability on the toughest terrains -Sole inserts are engineered for durability

Drako 2S SRS is designed for athletes looking for maximum foot stability to unleash all their power. The ventilated carbon sole, with the innovative Firmor Lateral Support System, combines efficient power transfer with superb lateral stabilization of the foot. The dual rotor closure allows for a perfect individual fit, with added protection from mud and debris -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The central mounted Single Techno-3 Push mechanism guarantees balanced fit for every type of instep -Techno-3 Push System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel doesn't slide out during steep climbs or sprints -Each side of the heel can be adjusted independently, for a perfect fit -The reinforced heel cup stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer -The MTB SRS Carbon-Ground Sole raises the standard for mountain bike performance, dropping off about 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability -The MTB SRS Carbon-Ground Sole uses replaceable tread blocks in the heel and the toe - The Ground SRS treads and MTB plate are easily removable and replaceable

Engineered specifically for athletes who seek maximum foot stability when unleashing extreme power. Ventilated carbon sole with innovative Firmor lateral support system suitable for athletes who need to combine power transfer with greater lateral foot stability. The specially designed dual-rotor closure offers the ultimate adjustment for the perfect level of lateral support. -Made with high-grade Microtech microfiber to enhance foot stability -Adjustable heel retention allows for a bespoke fit -Firmor later support provides added stability -Dual dial system with Dyneema cables allows for precision fitting -The vent carbon sole has a high stiffness level, creating a maximum power exchange on the pedals

The Sidi Wire 2S Road Shoes are engineered specifically for athletes who seek maximum foot stability when unleashing extreme power. Ventilated carbon sole with innovative Firmor Closure lateral support system suitable for athletes who need to combine power transfer with greater lateral foot stability. The specially designed dual-rotor closure offers the ultimate adjustment for the perfect level of lateral stability. -The Single Tecno-3 system creates a perfect tension balance between the shoe's internal and external side, and guarantees an excellent closure adapting to every instep -The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included for determine the riders personal cleat position -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. Wire's heel pad has a new design and it is very light -The Vent Carbon Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort

Engineered specifically for athletes who seek maximum foot stability when unleashing extreme power. Ventilated carbon sole with innovative Firmor Closure lateral support system suitable for athletes who need to combine power transfer with greater lateral foot stability. The specially designed dual-rotor closure offers the ultimate adjustment for the perfect level of lateral stability. -The Single Tecno-3 system creates a perfect tension balance between the shoe's internal and external side, and guarantees an excellent closure adapting to every instep -The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included for determine the riders personal cleat position -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. Wire's heel pad has a new design and it is very light -The Vent Carbon Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort -The women's specific fit is narrower across the ball of the foot and features less volume inn the instep area and a narrower heel cup

An elevated classic Trek RSL Road Cycling Shoe is a pro-level shoe that couples classic aesthetics with game-changing tech for an exceptionally fast, comfortable, and lightweight shoe. Trek RSL Road Cycling Shoe is professional pedigree through and through. An expertly crafted traditional upper and innovative new tech vastly improves comfort and performance, elevating your every attack, breakaway, and sprint. Game-changing METNET relief zones give flex where it's needed most. A 100% OCLV Carbon plate delivers superior power transfer for maximum efficiency. Dual Li2 BOA dials provide a dialed, precision fit, ensuring even more comfort and support. - METNET relief zones stretch and conform to the foot to relieve common foot discomfort - Updated Trek Pro Last provides a wider performance fit that better matches the average foot - Dual Li2 BOA dials provide low-profile, on-the-fly micro-adjustability for a precision fit - 100% OCLV Carbon plate provides excellent power transfer for optimal pedaling efficiency - External heel cup and no-slip heel lining prevent slippage and improve efficiency - Perforations throughout the upper and three vents within the sole provide excellent breathability - Insoles are made with Rise by BLOOM, a bio-based EVA foam replacement - Compatible with 3-bolt cleats

Supremely engineered for your fastest efforts. With its ultra sleek lines, optimal power transfer, and refined pro-grade features, the RC903 is the culmination of our most advanced technologies for a performance elevating race shoe that feels and functions unlike anything you’ve worn before. Features: - Premium Road Cycling Shoe: S-PHYRE RC903 is a high performance road racing shoe compatible with SPD-SL cleats - Precise Fit: dual low-profile BOA® Li2 dials deliver quick and precise micro-adjustments - Optimum Stiffness: reduces energy loss and maximizes power transfer - Anti-twist Heel Cup: stabilizes heel to help manage the intense twisting forces caused by explosive acceleration - Breathable Shoe: lightweight micro-fiber leather upper with perforated venting keeps feet cool during even your sweatiest pursuits - Cleats sold separately BUILT FOR PERFORMANCE Anti-twist stabilizing structure within the heel cup offers unparalleled stability during explosive sprints. DYNALAST technology secures your foot in place, reducing power loss at the pedal and lessening fatigue during long rides, while the optimized toe-spring section reduces tension in your feet, calves, and hamstrings - so you can go further, faster. EXCEPTIONAL FIT How a shoe fits and feels defines its performance. The RC903 takes both to the next level with a 360º surround wrapping upper, a refined toe box fit, and a low-profile crossover lacing pattern with two BOA® Li2 dials for the most precise fit possible.

From recent road converts, to sultans of dirt speed, the new S-Works Recon delivers pavement-bred performance to the gravel and XC discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there are no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - Approximate weight: 280g for a 1/2 pair size, 44

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

From recent road converts, to sultans of dirt speed, the new S-Works Recon delivers pavement-bred performance to the gravel and XC discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there are no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - Approximate weight: 280g for a 1/2 pair size, 44

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA® cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. New upper features reinforcement in key zones while also offering adaptie fit zones to create a disappearing fit on the foot. Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. By optimizing its constructiuon, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. Updated BOA® cable routing improves lockdown while reducing pressure across anterior ankle ligaments. Independent alloy BOA® S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA® Guarantee. Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

Trek RSL Mountain is an all-out race shoe designed to optimize power transfer, comfort, and weight. Pro level kicks built for the race Trek RSL Mountain Bike Shoes are all-out, race-ready off-road shoes made for kicking up dust and hammering to the front of the pack. Engineered to provide unparalleled power transfer and best-in-class comfort in a lightweight, expertly crafted package, this shoe elevates performance. They're built on Trek's stiffest and lightest 100% OCLV Carbon plate to leave no watt wasted. The dual Li2 dial BOA fit system and METNET relief zones comfortably lock in your foot for endless efficiency. They're finished with a race-ready Tachyon outsole and removable toe and heel spikes to deliver the best off-the-bike traction. PRODUCT DETAILS - Trek Pro Last delivers an ergonomically optimized, high-performance fit - METNET relief zones stretch and conform to the foot to relieve common foot discomfort - 100% OCLV Carbon plate provides excellent power transfer for optimal pedaling efficiency - BOA fit system with two Li2 dials provides a micro-adjustable, precision fit for a more dynamic and responsive ride - External heel counter and no-slip heel lining helps to stabilized the foot and improve efficiency - Tachyon rubber outsole and removable toe and heel spoke elevates excellent grip on any surface - Durable GnarGuard rubberized coating protects against abrasions and other damage from trail debris - Environmentally-conscious, high-performance Bloom insoles are made from 45% renewable sources

OWN THE FIELD. Maximize your efforts as you drop the hammer. Power up the steepest, most technical climbs. Maintain stability and control as you unclip to cross a sketchy obstacle. Featuring a rubber-protected, 100% carbon, dual ExoBeam outsole combined with an all-new internal ExoWrap with dedicated BOA, the Charge Pro mountain bike shoe delivers the pinnacle of lightweight XC, CX and gravel performance. FEATURES - A 100% long-fiber carbon ExoBeam plate featuring a full rubber-covered dual-beam design, offers secure mid-foot contact on the pedal while un-clipped, without sacrificing torsional flexibility, stiffness, or power transfer - Reinforced high-density, water-resistant PU upper with laser-cut micro-perforations combines optimal support with extremely low weight while providing optimal ventilation and promoting a balanced foot climate - Unique fully internal, direct pull ExoWrap with dedicated Boa IP1 dial produces a 360° foot enclosure for customizable arch fit and support - Exclusive Slip-Last construction allows the forefoot to be stiff while enabling torsional ration of the rear and midfoot - Reversed forefoot strap ensures maximum comfort and a secure fit - Ultra grippy SharkSkin heel liner gives a secure, slip-free fit even under the harshest conditions - Molded TPU toe guard protects forefoot and features double secure cleat inserts - Removable sock liner with tunable arch support and TransTextura Plus antimicrobial layer promotes a balanced foot climate - Weight: 338g (size 45)

- Limited edition Series 1 Holographic design - E.R.T. slip-plane system reduces impacts causing C.T.E. - The most ventilated full-face hardshell helmet on the market - Carbon shell using the Project Lab layering process to reduce weight as much as possible - Easy position visor angle no bolts needed - Injection molded branded trim to protect carbon helmet shell - AGION anti-microbial liner helps to keep things smelling fresh - TF (Through Flow) goggle ventilation allows full air flow - Quick-release liner for easy washing and cleaning - Supplied with padded pro helmet bag - Fidlock magnetic closure - Meets CE, CPSC, AS, ASTM F1952-15 standards - 922g (large) - Third party online sales strictly prohibited by manufacturer

A minimalist look for a concentrate of rigidity, softness, and flexibility. The fast and efficient shoe with tested strength and grip for the most demanding actions. Easy adjustment and a clean design make it even easier and more immediate to use. Developed in partnership with Sartoria Ciclistica, these shoes embody the spirit of cycling as a recreative activity, perfectly paired with a cup of coffee. -Anatomical heel construction is contoured for better stability -Dyneema dialing system is crafted from high-density resin for a customizable fit -Aerolite carbon plus nylon with sole with a stiffness level of optimized for ergonomics with power transfer -Sole inserts engineered for durability

Designed for our professional athletes, the Shot 2S is crafted to deliver optimal power transfer while ensuring the utmost comfort, enabling athletes to stay focused on the road. Its carbon C-Boost sole harnesses the full strength of woven carbon fibers, while the upper is constructed using Bioveg material derived from recycled microfibers and finished with an external plant-based coating. The innovative closure system is strategically positioned away from other riders, enhancing maneuverability in crowded situations. The adjustable heel retention mechanism allows you to secure the heel of the shoe, tightening the heel so that it confirms to any riders heel shape. - The Tecno-3 Push System completely eliminates the pressure zone on the instep and significantly improves comfort - The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel - The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -The all new SIDI integrated heel cup is reinforced to avoid deformation after prolonged use. Anatomically shaped, it stabilizes and supports the foot when pedaling - C-BOOST SRS Sole is made of the latest generation carbon, thanks to the special conformation of the metatarsal area, it increases the transmission of power directly on the pedals, guaranteeing ideal power transfer and support - Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included to facilitate accurate and repeatable cleat set-up - Provided with SRS (Sole Replacement System) inserts in Nylon and TPU, with the function of protecting the carbon in the areas most subject to deterioration from use and for increased durability while walking - The SRS inserts are integrated by ventilation holes that promote the circulation of air inside the sole with each pedal stroke

Dedicated to the strongest conformations, the Sidi Dragon 5 Mega guarantees a perfect feeling of comfort even for those with a wider sole or high instep, ensuring comfort, rigidity and performance. -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The reinforced heel cup stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer -The MTB SRS Carbon-Ground Sole raises the standard for mountain bike performance, dropping off about 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability -The MTB SRS Carbon-Ground Sole uses replaceable tread blocks in the heel and the toe - The Ground SRS treads and MTB Plate are easily removable and replaceable

The iconic design that gave birth to our first cycling shoes over 60 years ago meets modern materials to create our lightest racing shoes. Designed to retain all support and strength, the Sidi Sixty offers the ultimate fit in a pair of racing shoes for cycling. -The Sidi Tecno-4 Push System has a single rotor to reduce the shoe's weight and guarantees the precision of a micro-metric closure -The Adjustable Heel Retention device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -The Vent Carbon Sole is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area -The Vent Carbon Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale for easy cleat alignment and replacement -The key benefits of the Vent Carbon Sole are not only superior power transfer because of its light weight and stiffness, but also warm weather comfort -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad