Handlebars & Grips

Keep your bike looking good with SRAM's HydroR Lever Hoods. They're made of a soft, grippy rubber and are a great replacement hood for HydroR levers.

Mass is the enemy of performance, so we pulled out all the stops to make the Alpinist Cockpit the lightest one-piece bar/stem combo that passes our standards; at 255 grams (110 mm x 420mm). Not only does light weight make for faster climbing, it also improves acceleration and ride quality. The Alpinist Cockpit's round tube shape and tradition bend respect tried and true forms, but the optimized composite layup and internal cable routing are decidedly modern. Available in 10 sizes, there's one that will fit you perfectly. And because they are backed by a no-fault crash replacement policy and lifetime warranty, you can rest easy knowing that we've got your back. - Bend: Tradition radius ( 125mm Drop / 75mm Reach) - Clamp Diameter: 31.8 - Compatibility: Shimano, SRAM, Campagnolo; Di2 and EPS - Material: Advanced carbon composite - Sizes: 400 mm x 80/90/100mm; 420mm x 90/100/110/120mm; 440mm x 110/120/130mm - Stem Angle (Rise): 6-Degrees - System Weight Limit: 275lbs / 125kg - Weight: 255 grams (110 mm x 420 mm)

Wind is the ultimate cruelty, and nowhere is it more keenly met than at the leading edge of your bike. Want to save an easy 20 seconds over 40 kilometers? Get a set of Rapide handlebars. Leveraging our countless hours of Win Tunnel testing, we designed the Rapide bar to cut through the wind with knife-edge efficiency, and at the same time, provide the utmost comfort while hammering at the front. A textured surface on the tops ensures secure and comfortable grip, even when wet; there's a recessed step that sets the bar wrap flush with the tops; the airfoil is offset forward to offer greater forearm and knee clearance; and, at 225 grams, the Rapide is the lightest aero bar in its class. Aerodynamic performance without compromise. This is the leading edge. - Aerodynamically engineered to save 20+ seconds over 40km vs. a round bar - Optimized blend of high modulus carbon fiber materials yields lightest-in-class aero bar at 225g (size 42cm) - Innovative features, like textured tops and a smooth bar tape step, enhance your experience - Bend: 125mm drop x 75mm reach

The TwistLoc remote and grip set maximizes efficiency and space, while keeping your hands safely on the bar. Twist to lock, push the button to unlock on forks, rear shocks or both in tandem. - Curved “CRVD” vs. and straight “STRT” cable options (see photos for reference) - Encouraged for XC, Trail, and Enduro usage - Easy action - Twist to lock, push button to release - Fixed grips included

For riders looking for the perfect fit or a little more comfort miles into a gravel ride, the ErgoMax features an anatomical shallow drop mated with 25mm of rise for an unsurpassed ride quality - Bar Clamp Diameter: 31.8mm - Bar Drop: 128mm - Bar Reach: 73mm - Bar Top Style: Round - Accessory Mount Diameter: 31.8 - Drop Bend Style: Compact - Cable Routing: External - Material: Aluminum - Clip-on Compatible: Yes - Flare: 4.6

With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build. - Material: 6061 alloy - Width: 670mm - Rise: 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 25.4mm - Bar-end compatible: yes - Weight: 399g

Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep

Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep

Race Face Half Nelson Lock-On Grips • Super-slim profile • Race Face MX style half waffle for extra grip security • Topographical moisture channels • Compatible with ODI lock jaw clamps

What comes between you and the mountain bike you love? The Love Handle, a very thin profile, double lock-on grip featuring Race Face's durable yet super tacky silicone compound that delivers long wear and all weather stickiness. The Love Handle is not only about its silicone good looks though, the palm area is contoured with channels to allow air to circulate and moisture to dissipate while the diamond pattern in the finger grip zone provides tons of control. Get a good grip; you won't want to lose these love handles! - Double lock on grip - Super slim low profile design with directional shape - Race Face's durable yet super tacky silicone compound won't wear out as quickly as typical grips and have a superior sticky feel even when wet - Directional design features contoured palm area with moisture dissipating channels and diamond patterned underside to enhance finger control and mitigate unwanted slips - Lightweight construction

- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep

- PU and microfiber material - Extra grippy for all conditions - Smart silicone adhesive back (easy to replace) - Thickness: 2.5mm

- Patented oval bar shape increases vertical compliance and combines the best characteristics of 31.8 & 35.0mm diameter handlebar standards - Profile minimizes the 35mm clamping area and quickly changes to a flattened oval shape in the transition zone and then to the standard 22.2mm clamp for shifter/brakes/grips - Strong and lightweight handlebar minimizes arm pump and vibration while maximizing steering response - Third party online sales are strictly prohibited by manufacturer

The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar. - 41-Thermal processed 4130 chromoly - Multi-butted

Broc Raiford signature grips feature a comfortable ribbed design and smooth ends for improved wear resistance. - 160mm lenght - Par Ends Included

Broc Raifrod's new signature BROC bar is built around the popular Odyssey Lumberjack XXL bar shape but uses a more narrow "pre-cut" 29" width and slightly less backsweep at 10 degrees. - 41-Thermal Lifetime Warranty - 1.8/1.3mm thick, multi-butted main tubing - Butted, traditional 7/8? crossbar for strength - Large radius bends for greater durability - Post-weld heat-treated

Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

The Super Highway bar is a mid-rise bar that comes with Odyssey's legendary 41-Thermal lifetime warranty. - 1.8/1.3mm thick, multi-butted main tubing - Butted, traditional 7/8? crossbar for strength - Large radius bends for greater durability - Post-weld heat-treated

What's better than a grip that already feels worn in? The alternating rib pattern on the Odyssey Warnin' grip, as well as the grip's unique dual shot injection process, allows to offer a grip with an extra soft and thin feel in your hand, but with a harder secondary inner layer to help resist tearing. As usual, Odyssey's legendary Par Ends are included. - Gary Young signature - Dual compound for comfort and durability - Par Ends included

- Developed in collaboration with 2x World Cup Champion Aaron Gwin - Ergonomic single clamp design with aluminum reinforced ends - Angled rib pattern matches the articulation points of your hand - Bonus pack includes Lock-On grips and v2.1 clamp

The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm

The Tinker Juarez Signature Dread Lock Grips offer the padding and control needed for longer rides. Designed for comfort at every turn, the Dread Lock Grips feature ODI's exclusive ultra-soft and lightweight A.I.R.E. compound along with an offset design that provides additional padding for your hands without the feel of a bulky grip. Soft TPE ends provide extra support when railing turns and help to protect your grips from impacts while the V2.1 Single-Clamp Lock-On system ensures that your grips stay put no matter what the conditions. - Offset Grip design provides more padding on the palm side of grip - Contoured surface for improved comfort on longer rides - Soft TPE Ends offer improved comfort and grip protection - Ergonomic finger cutouts provide improved grip in all conditions - Dread Lock textured surface provides improved control with less effort

- Designed with help from Tinker Juarez - Large diameter grip at 34.5mm - Offset grip design provides more padding on the palm side of the grip - Soft TPE end offer improved comfort and grip protection - Made from ODI exclusive A.I.R.E compound for reduced weight and improved vibration dampening - Contoured surface for improved comfort on longer rides - Ergonomic finger cutouts provide improved grip in all condition - Version 2.1 Lock-On system ensure 100% slip-free performance

- Offset grip design provides padding where it is needed most - Half-Waffle pattern for added control - NEW SINGLE CLAMP - Version 2.1 Lock-On System - Soft Pro Compound for excellent shock absorption - Reinforced Soft Ends for Added Durability - Grip Length: 130mm

The Elite Flow grips feature an offset design that provides more padding in certain areas to eliminate the need for a thicker grip. - Single clamp design - Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike - Length: 130mm

ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. - Offset grip design provides padding where it is needed most - Variable knurl pattern provides comfort/traction where you need it most - Version 2.1 Lock-On System - Soft Pro compound for excellent shock absorption - Reinforced soft ends for added durability - Super slim profile

The Elite Pro grips feature an ergonomic design that conforms to a rider's hands without feeling bulky. - Single clamp design - Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike - Length: 130mm

The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange! - Classic mushroom style collapsible rib pattern - Constructed of our proprietary Soft Grip compound for added comfort - Increasingly popular with top athletes around the world - Open ends with black and white Two Color Push In Plugs end plugs included

The classic Longneck ribbed grip pattern with an open end to accomodate end plugs. - Classic mushroom style collapsible rib pattern - Constructed of our proprietary grip compound for comfort and durability - The grip of choice for top athletes around the globe - Open ends with Thug Plug end plugs included

- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)